UNDERFLOOR HEATING PANELS
KAY-CEL under floor heating panel is manufactured by Kay-Metzeler Ltd., one of the country’s leading suppliers of Expanded Polystyrene Products, and is supplied in varying grades, types and sizes.
The insulation board is manufactured from Expanded Polystyrene (EPS), and laminated to a highly resistant, fibre woven film. This film acts as the protection layer for the product.
The EPS is manufactured and tested in accordance with European Standards, contains no CFC’s or HCFC’s, and is totally recyclable. A 50mm Grid Pattern is printed onto the film, which assists the installer to lay the under floor heating pipes in the correct positions. The pipe is positioned in place, then fixed to the insulation using a "U" clip. The laminate film covering the EPS board, is specially designed to hold the "U" clip in place, and ensures the under floor heating pipe is held tightly in position. The film covering on the insulation overhangs the board by 50mm, enabling overlaps to be taped to form a continuous seamless surface.
KAY-CEL BOARD DIMENSIONS & GRADES
Standard board size is 2400mm x 1200mm x various thicknesses, to customer’s requirements. Board can also be supplied in a folded board size 2400mm x 500mm x various thicknesses. Additional sizes available upon request – please enquire for additional costs and lead times. Board is available in the following grades of EPS KAY-CEL EPS 70, EPS 100, EPS 150, EPS 200, and KAY-CEL Super Plus 70, Super Plus 100.
KAY-CEL Gridboard is used from small to multi unit apartment and housing developments. Gridboard can be supplied in both conventional white KAY-CEL and where a higher thermal performance is needed KAY-CEL Super Plus. The boards can be manufactured in the following grades KAY-CEL EPS 70 to EPS 500. The top side of each board has a red grid-patterned layer which assists in the following…
KAY-CEL Grooveboards are a contoured EPS board for the underfloor heating market. Standard sizes for this panel are 1200mm x 1200mm and are available in various thicknesses. The boards can be manufactured in the following grades KAY-CEL EPS 70 to EPS 500
For customers requiring improved thermal performance, the boards can also be manufactured from KAY-CEL
Super Plus with a thermal performance of 0.031
KAY-CEL boards are compatible with ALL types of screed, and readily accept all preparatory fixings ensuring that pipes remain in position until they are encased in the floor screed. Further information on is available from
Kay-Metzeler (Technical Desk).
KAY-CEL boards are delivered to site wrapped in polythene. The boards should be stored in the original wrapping, undercover, and protected from direct sunlight. Boards should be kept above ground level and out of contact with solvents and materials containing volatile organic compounds such as coal tar, pitch or timber recently treated with creosote or diesel fuel. Do not expose to naked flame or other ignition sources during storage or installation.
Kay-Metzeler have the technical capabilities to develop and produce under floor heating panels and products to customers exact requirements, including deflector panels, specialist laminates and many other specific products.